Victory Clad Technical Data Information

Victory Clad™ VC 600ST (Seam Tape)

PRODUCT DESCRIPTION

Victory Clad VC600ST is a 6-Ply conformable seaming tape designed for use with on the Victory Clad 700 series product line. The VC600ST is used as a lap and butt seam tape on Victory Clad 700 Jacketing products, where double seals and durability is needed. The VC600ST can also be used where comfortability is needed on piping and ductwork applications. The VC600ST has a Zero Perm rating to prevent moisture infiltration and is UV Stable. The Acrylic Adhesive system is suitable for use in extreme temperatures (-94 F to +284 F).   

Product Colors: Aluminum, White, Grey, Black & Embossed
 

PRODUCT DATA

Product Thickness: Value 8.0 Mils. Standard: DIN EN 1942

Tensile Strength: Value 127lbs/in. Standard: EN 527-3

Elongation: Value >60%. Standard: EN 527-3

Water Permeability: Value 0.00 Perm. Standard: ASTM F1249 ISO 15106-2

Service Temperature: Value -94˚F to +284˚F

Application Temperature: Value -22˚F to +266˚F

 

CHARACTERISTICS & ADVANTAGE

  • Aluminum, White, Black. Gray & Embossed 
  • High quality silicone release liner 
  • Acrylic adhesive Extreme Temperature Range 
  • Available on 50 yard rolls, in 3" Widths. 
  • Superior adhesive technology 
  • Superior sealing and bonding on joints and seams 
  • Excellent ageing and Mold resistance 
  • Zero Perm moisture vapour transmission rate 
  • Offers excellent sealing and patching performance.

 

GENERAL INSTALLATION GUIDELINES

Surface Preparation

All surfaces are to be dry, clean free from dirt, dust, grease, oils, silicones and other contaminates. All exposed fibrous insulation should be covered by foil tape and/or matching facing tapes. Insulation Materials should be properly secured to provide a smooth and even surface to allow and even and smooth application of Victory Clad jacketing with the VC200 seam tape. All insulation materials must be securely fastened to industry standards to prevent movement or shifting of the insulation material.

Application

Remove the release paper from the section of Victory Clad 600ST, taking care not to minimize touching the adhesive surface. Align the tape centrally over the joint seam. Pull the tape taut and then press down firmly over the entire joint area. Apply pressure with plastic squeegee to ensure proper bond.
 

METHOD STATEMENT

Victory Clad, Inc., provides detailed method statements for use in various applications, and are available upon request. These must be referred to prior to commencing work.The information, and, in particular, the recommendations relating to the application and end-use of Victory Clad,Inc .products, are given in good faith based on ., current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Victory Clad,Inc ., recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. ,  reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.  
 

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.